What we offer

Services

All work carried out or directly supervised by Andre Magdich CPEng.

Stormwater Design and Neutrality

Most councils now require that your development does not increase stormwater runoff. We design the detention tanks, ponds, or swales needed to meet that requirement and get your consent approved.

Every council applies stormwater neutrality differently. We have active experience with Napier, Auckland, Horizons, Rangitikei, Hamilton, and others across the North Island. From a 2-lot infill needing a single tank to a 90-lot subdivision requiring a detention pond, we design and size the system to meet your council's specific rules.

What you get
  • Stormwater management report for consent
  • Detention tank or pond design drawings
  • Council correspondence and engineering plan approval support
  • CPEng-signed documentation

Flood Hazard Assessment

If your site is near a stream, floodplain, or shows flood risk on council maps, you likely need a flood assessment. We model the flood risk on your site and set safe building levels so your consent can proceed.

We use industry-standard HEC-RAS 2D flood modelling on high-resolution terrain data. The result tells you and your council exactly how your site behaves in a flood event, including climate change scenarios. Our flood assessments have been validated by real events, including Cyclone Gabrielle in 2023.

What you get
  • Flood hazard assessment report
  • Flood maps showing extent and depth
  • Recommended floor levels for building consent
  • Response to council flood conditions

Three Waters Infrastructure

Subdividing land requires engineered stormwater, wastewater, and water supply networks. We design the full system from concept through to construction drawings, council approval, and S224c sign-off so your titles can be issued.

We work to NZS 4404:2010 and each council's specific standards. Projects range from small infill sites with shared service connections through to large greenfield subdivisions with full road, pipe, and pump station design.

What you get
  • Infrastructure design report
  • Construction drawings (roads, stormwater, wastewater, water supply)
  • Producer statements (PS1, PS3, PS4)
  • S224c certification package

Road and Driveway Design

New subdivisions and development sites need engineered road layouts, access designs, and driveways that meet council standards. We design these to NZS 4404:2010 and your council's specific requirements, ready for consent and construction.

This includes road cross-sections, pavement design, vehicle tracking, and access geometry for both residential streets and private driveways.

What you get
  • Road layout and cross-section drawings
  • Pavement design
  • Vehicle tracking analysis
  • Access and driveway design for consent

CPEng Engineering Review

Many councils require that infrastructure reports are signed off by a Chartered Professional Engineer before they will accept a consent application. If your designer needs a CPEng to review and authorise their work, we provide that independent sign-off.

Every report is reviewed at principal engineer level by Andre Magdich CPEng. We have reviewed and signed off 30+ infrastructure reports for Auckland-based projects, covering stormwater, flood, wastewater, and water supply.

What you get
  • Peer review report with comments and resolutions
  • CPEng-signed report ready for council submission
  • Confirmation letter to council where required

Expert Witness

If you have a flooding or stormwater dispute heading to court, we provide independent expert evidence. Andre has appeared in the High Court representing Hastings District Council on flooding and stormwater matters.

Available for councils, insurers, and legal teams who need independent, technically credible evidence from a CPEng-qualified civil engineer.

What you get
  • Expert witness brief of evidence
  • Technical analysis and opinion
  • Court appearance and cross-examination

Need civil engineering support?

Get in touch to discuss your project scope and timeline.

Contact us